Fresh Water Flush Components; Electronic Components - Sea Recovery SRC Aqua Matic 700-1 Owner's Manual

3. Air Entrainment Tank
To be supplied by the System's Owner. This tank (also known as an accumulator) is sometimes installed into
a ship's Fresh Water line to eliminate pulsations from the Fresh Water Pressure Pump, as well as to reduce
the demand on the pump. The tank stores pressurized Fresh Water for delivery to the ship's fresh water piping.

Fresh Water Flush Components

The Fresh Water Flush section includes a Carbon Filter and an automatic, motor-actuated Ball Valve that
automatically flushes the System with Fresh Water. This process occurs automatically every time the System shuts
down, and repeats on a preset frequency (in days). Fresh Water Flushing replaces the sea water in the System
with less corrosive fresh water, which also reduces the biological growth and subsequent decay that naturally
occurs if the sea water is not flushed from the System with fresh water. For additional information on obtaining this
optional accessory, please contact Sea Recovery Corporation.
1. Fresh Water Flush 2-way Solenoid Valve
Automatically actuates at System shut down (and at a preset frequency, in days) to flush the system with Fresh
Water.
2. Fresh Water Flush Check Valve
Prevents Feed Water from entering the fresh water line.
3. Fresh Water Flush Charcoal Filter
Removes chlorine (if present) in the Fresh Water, prior to flowing through the RO Membrane Element.
4. Cleaning Bucket
To be supplied by the System's Owner. Can be any non-ferrous container capable of holding at least 10 U.S.
Gallons (37.8 Liters) of water. This container is used during the RO Membrane Element cleaning, storing, or
winterizing process.
5. Rinse Clean Valves (optional)
Mounted separately on singular individual plates or together on a double plate. The Rinse Clean Inlet Valve
(used in conjunction with the Rinse Clean Outlet Valve) simplifies the storage and cleaning procedures by
allowing the Operator to turn a valve, rather than disconnect a hose. Also used for manual Fresh Water Flush
if the Automatic Fresh Water Flush System is not installed. Note that the Rinse Clean Valves are available on
single or double valve mounting plates.

Electronic Components

The Electronics section measures water quality, controls the direction of Product Water flow, starts/stops the
pumps, and contains the System's central electrical connection point. It also ensures that only potable Product
Water passes into the Product Water Storage Tank.
1. System Touch Panel
Provides access to all System functions. Features an intuitive touch-screen and displays all operating conditions
that are being monitored.
2. Electrical Control Box
Contains all electrical and electronic components that control the System.
3. Remote Control Touch Panel (optional)
Allows for remote control, operation, and monitoring of the system. For additional information on obtaining this
optional accessory, please contact Sea Recovery Corporation.
4. Soft Start (optional)
Used only in AC Single Phase systems, this component reduces the initial start-up amperage that is required
to turn on the High Pressure Pump Motor. Thus, a smaller KW generator can be used to start the system. Note
that start-up amperage is reduced by 40% with the Soft Start installed. For additional information on obtaining
this optional accessory, please contact Sea Recovery Corporation.
26 Aqua Matic Compact 450-1800