Unpacking And Checking Package Contents; Figure 2-1: 19-Inch Rack And Desktop Accessories - AudioCodes Mediant 2000 Hardware Installation Manual

Hardware Installation Manual
2 Unpacking and Checking Package
Contents
Follow the procedure below for unpacking the carton in which the device is shipped.

To unpack the device and verify content:
1. Open the carton and remove packing materials.
2. Remove the device from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the device, the package contains the following items:
•
One CD containing AudioCodes software utilities.
•
Two AC power cables (only applicable for the dual AC power supply version).
•
One AC power cable (only applicable for the single AC power supply version).
•
One DC power cable (crimp connection type) and one DC adaptor (screw
connection type) connected to the rear panel of the device - use only one type
(only applicable for the DC power supply version).
•
Small plastic bag containing (refer to the figure below) the following:
♦
♦
5. Check, retain and process any documents.
6. Notify AudioCodes or your local supplier of any damage or discrepancies.
Version 6.4
Two brackets and four bracket-to-device screws for 19-inch rack installation
option.
Four anti-slide bumpers for desktop / shelf installation option.

Figure 2-1: 19-inch Rack and Desktop Accessories

2. Unpacking and Checking Package Contents

9 October 2011