Silicon Laboratories TOOLSTICK C8051F850 User Manual page 6

TOOLSTICK850DC-UG
To configure pins, click on the DefaultMode Port I/O tab at the bottom of main window. Clicking on a pin brings up
a property window for the pin. Clicking anywhere else in the main window opens a property window for the
crossbar. Select multiple pins with Ctrl + left click or mouse dragging over the desired set of pins. The package
diagram displays the configured peripherals on the pins, including non-crossbar signals (i.e., ADC inputs).
Code generation updates every time the configuration project saves. After configuring the device, add any non-
initialization code, build, and debug the same as with any other project.
More information on Simplicity Configurator can be found in AN0823: Simplicity Configurator User's Guide and
AN0821: Simplicity Studio C8051F85x Walkthrough. Application notes can be found on www.silabs.com/8bit-
appnotes.
Figure 6. Simplicity Configurator – Configuring Port I/O
6 Rev. 0.2