Table of Contents
Advertisement
Quick Links
October 17, 2000
Federal Communications Commission
7435 Oakland Mills Road
Columbia, MD 21046
FCC ID:
O7KSM3450U2
731 Confirmation Number: EA
98548
Correspondence Reference Number:
16471
1/
Because of recent occurrences of authorized operation at 406 MHz, the US Coast Guard and
NOAA have asked us to implement a program to notify the equipment manufacturers, service
personnel and users that the frequency band 406 - 406.1 MHz is reserved for use by distress
beacons. Such steps should include a warning in the users manual. The ultimate protection would
be software to lockout this frequency band. Please indicate what measures you will take in this
matter.
Verify that this frequency band will NOT be programmed into the preprogrammed channels.
Revised Operating Instruction Manual is attached.
Advertisement
Table of Contents
Related Manuals for Maxon SM-3000 Enduro series
Summary of Contents for Maxon SM-3000 Enduro series
- Page 1 October 17, 2000 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: O7KSM3450U2 731 Confirmation Number: EA 98548 Correspondence Reference Number: 16471 Because of recent occurrences of authorized operation at 406 MHz, the US Coast Guard and NOAA have asked us to implement a program to notify the equipment manufacturers, service personnel and users that the frequency band 406 - 406.1 MHz is reserved for use by distress beacons.
-
Page 2: Table Of Contents
We urge you to thoroughly read this manual before operating the radio. Application of some of the functions described in this manual is determined by the system you use. Your Maxon Dealer will program your radio so that you have the greatest number of functions possible relative to your needs. -
Page 3: Safety / Warning Information
Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment. Maxon subscribes to the same safety standard for the use of its products. Proper operation of this radio will result in user exposure far below the Occupational Safety and Health Act and Federal Communications Commission limits. -
Page 4: Sm-3000 Enduro Series Features
Microphone Bracket and Hardware Operating Instructions If any items are missing, please contact your Dealer or Maxon. SM-3000 Enduro Series Features Wideband frequency separation 10 or 40 W programmable output power Programmable 12.5/25 kHz channel spacing Channel scan Priority channel scan... -
Page 5: Sm-3000 Enduro Series Operation
Channel Select/Channel Group Select The SM-3000 Enduro series is capable of up to 13 programmed groups with up to 16 channels per group for a total channel capacity of 99 channels. To change channels press and release the s or t buttons. A press and hold will scroll through your programmed channels. -
Page 6: Receive
Status Indicators and Audible Alert Tones Your SM-3000 Enduro series has a sophisticated microprocessor control which provides a series of audible alert tones. Upon initial power up, a quick melody indicates that the self-test of the microprocessor functions has been completed satisfactorily. -
Page 7: Other Scanning Features
When power is restored or the scan list channel position is again selected, the original Dealer programmed scan list will be activated. · CTCSS/DCS Scanning: The SM-3000 Enduro series can be programmed by your Dealer to scan for tone. This will help block out unwanted calls. - Page 8 Maintenance Your SM-3000 Enduro series Radio is designed to be maintenance free. To keep your radio in good working condition: Clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water. Apply the solution sparingly to avoid any moisture leaking into cracks and crevices.
Need help?
Do you have a question about the SM-3000 Enduro series and is the answer not in the manual?
Questions and answers