Subscribe to Our Youtube Channel
Related Manuals for Maxon SM-2000E Series
Summary of Contents for Maxon SM-2000E Series
- Page 1 SM-2000E Series User Manual "Professional Mobile Radio" TecNet International Inc. 11535 W. 83rd Terrace Lenexa, KS 66214 Tel.913-859-9515 Fax.913-859-9550 E-mail: tecnet@tecnetusa.com www.tecnetusa.com...
-
Page 2: Table Of Contents
12. AVOID the use of chemical agents such as benzene or alcohol when Squelch Options---------------------------------------------------15 cleaning, as they can damage the transceiver surfaces. CTCSS ------------------------------------------------------------15 13. ALWAYS USE original Maxon microphones. 3rd party microphones have DCS-------------------------------------------------------------------16 different pin assignments and may damage the transceiver. Squelch Defeat (Monitor) operation---------------------------16 14. -
Page 3: Specification
The application of some of the functions described in this manual are determined by the system you use. Your Maxon Dealer will program your radio so that you have the greatest number of functions possible relative to your needs. The below specifaction outlines the approximation ... -
Page 4: Installation
Installation SM-2000E Features & Description Programmable feature list DC Power Supply Wideband 400-470 MHz 136-174 MHz 99 Programmable channels Antenna socket The supply voltage for the The antenna connector is a SO-239 SM-2000E is 12V – 13.8 Volts DC. CTCSS/DCS/IDCS tone Signalling High/Low power 25W or 5W Programmable "M"... -
Page 5: Front Panel
Front Panel Rear Panel Antenna lead should be fitted here, the connector type is SO-239 Antenna Connector SO-239 M type. The impedance at this point is 50Ω 15 way Sub D-type External interface. Please see 15 Way Sub D-type table below for pin-outs. -
Page 6: Lcd Display
LCD Display Basic Radio Operation Before beginning any operation of the product please ensure installation has been carried out by a qualified engineer. Make sure connections - power, antenna and microphone have been fitted correctly. Many of the functions set out below are controllable via the PC programmer, please contact to your dealer for more information. -
Page 7: Basic Radio Operation Receiving
Channels 1) PTT Key (Push To Talk) The SM-2000E Series radio can store up to 99 channels within the same frequency band (UHF 400~ 470MHz VHF 136~174 MHz).These channels can be selected by using the ▼▲ (up/down) keys. Hold microphone approximately 3 inches distance from your mouth. - Page 8 Basic Radio Operation - Transmitting Basic Radio Operation - Transmitting 5) Penalty Timer 9) TX Delay You can not transmit during penalty time if transmitting is inhibited by 'TOT' function. TX delay eliminates squelch tails associated with CTCSS tone transmissions, by removing the LCD will show 'P-T' if you try to transmit within the specified time.
-
Page 9: Basic Programmable Features
SM-2000E series radios are capable of generating all 38 standard CTCSS tones and can also generate the 104 standard DCS codes and 104 inverted DCS codes. -
Page 10: Cloning
Scanning CLONING Scan operation Master Mode Scanning is a programmable feature that allows you to monitor a number of channels. Your Dealer will help you define a channel "scan list" to be programmed into a scan channel. Once that channel is selected, scan is initiated. - Page 11 Scanning Scanning Priority Channel Scan Nuisance delete This function is to delete a channel temporarily from the scan list. If a specific channel is busy A single channel may be programmed as the “Priority” channel. The radio will constantly monitor this channel while scanning and when the radio has stopped on an active channel.
- Page 12 Scanning Scanning Group scan edit Priority Scan edit The group scan edit feature can modify the scan list within each group. The Priority scan edit feature can modify the scan priority channel. If the scan list is modified and This feature can only be used if groups of channels have been pre-programmed into the radio by saved using this method the new list is entered directly into the memory of the radio and will remain the programming software.
-
Page 13: Emergency Call
Emergency Call Selcall code selection Emergency mode on/off Press Selcall selection button Assign 'Emergency Call' function to any of Programmable keys P1-P4 in the programmer. If you push the emergency key, the transceiver transmits three alert tones and will stay in the The LCD will display: TX mode until programmed TX time has ended. -
Page 14: Status And Error Messages
All Scan deleted "A-del" Single beep Transmit Inhibit in Scanning Two beeps "No-TX" Three (3) Year Limited Warranty on New Maxon Radio Products. Receive Only-No TX "No-TX" Two beeps One (1) Year Limited Warranty on LMR Radio Accessories. Time-Out-Timer "TOT"... -
Page 15: Service Information
Service Information TecNet shall have no obligation to make repairs or replacement of product which results from normal wear and tear, or is necessitated by catastrophe, fault, or negligence of the user, improper or unauthorized alterations or repairs to the product, incorrect wiring, use for which it was not designed or by causes external to the product.
Need help?
Do you have a question about the SM-2000E Series and is the answer not in the manual?
Questions and answers