Connecting A Dc Power Supply Cable; Figure 3. Dc Power Input; Figure 4. Dc Power Supply Cable - Hisense HK716 Series System Integration Manual


Select the appropriate voltage. Connect all the equipment into an isolated outlet to prevent
static electricity and short circuit.

Choose a location where sufficient power outlets are available for printers and other
peripheral devices.

Do not install the POS system near electromagnetic and electrical devices, such as phones
and electric motors, which can cause system damage.

The socket-outlet should be installed near the equipment and easy to access

Connecting a DC power supply cable

Connect the [DC power cable] to the [DC power input] at the bottom of the system.
Note: You can use a 100V - 240V adapter with this POS system.
You should only use the manufacturer (Hisense) adapter with this POS system. Hisense will not be
held liable for any damages caused by using products made by other manufacturers.(if not supply by
Hisense)

Figure 3. DC power input

Figure 4. DC power supply cable

Hisense HK716 Series All-in-One POS System Integration ManualPage 10 of 22
.