Figure 39. Installing the system battery
Next steps
1
If removed,
install the expansion card
2
Install the sled
into the enclosure.
3
Follow the procedure listed in
4
While booting, press F2 to enter System Setup and ensure that the battery is operating properly.
5
Enter the correct time and date in the System Setup Time and Date fields.
6
Exit System Setup.
Trusted Platform Module
Trusted Platform Module (TPM) is a dedicated microprocessor designed to secure hardware by integrating cryptographic keys into devices.
Software can use a TPM to authenticate hardware devices. Because each TPM chip has a unique and secret RSA key which is embedded
during the manufacture of the TPM, it is capable of performing platform authentication operation.
Replacing the Trusted Platform Module
Prerequisites
NOTE:
There is a TPM slot on the system board of each sled.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
NOTE:
•
Ensure that your operating system supports the version of the TPM module being installed.
•
Ensure that you download and install the latest BIOS firmware on your system.
•
Ensure that the BIOS is configured to enable UEFI boot mode.
About this task
CAUTION:
If you are using the Trusted Platform Module (TPM) with an encryption key, you may be prompted to create a
recovery key during program or System Setup. Work with the customer to create and safely store this recovery key. When
replacing this system board, you must supply the recovery key when you restart your system or program before you can access
the encrypted data on your hard drives.
82
Installing and removing system components
riser.
After working inside your
system.
Safety
instructions.
Before working inside your
system.