Dell E43S Series Installation And Service Manual page 45

Table of Contents

Advertisement

If System Password is not set to Enabled and is not locked through the Password Status option, you can assign a system password.
For more information, see
You cannot disable or change an existing system password.
NOTE:
You can use the password status option with the setup password option to protect the system password from
unauthorized changes.
Redundant OS Control
You can use the Redundant OS Control screen to set the redundant OS info for redundant OS control. It enables you to set up a physical
recovery disk on your system.
Viewing Redundant OS Control
To view the Redundant OS Control screen, perform the following steps:
1
Turn on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3
On the System Setup Main Menu screen, click System BIOS.
4
On the System BIOS screen, click Redundant OS Control.
Redundant OS Control screen details
NOTE:
The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
The Redundant OS Control screen details are explained as follows:
Option
Description
Redundant OS
Enables you to select a backup disk from the following devices:
Location
Redundant OS
State
When set to Visible, the backup disk is visible to the boot list and OS. When set to Hidden, the backup disk is
disabled and is not visible to the boot list and OS. This option is set to Visible by default.
Redundant OS Boot
System Security Settings details
None
Internal microSD card
SATA Ports in AHCI mode
M.2 drives
Internal USB
NOTE:
RAID configurations and NVMe cards are not included as BIOS does not have the ability to
distinguish between individual drives in those configurations.
NOTE:
This option is disabled if Redundant OS Location is set to None.
NOTE:
BIOS disables the device in hardware, so it cannot be accessed by the OS.
NOTE:
This option is disabled if Redundant OS Location is set to None or if Redundant OS State is set to
Hidden.
.
Pre-operating system management applications
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc xc6420 series

Table of Contents