Installing The M.2 Sata X16 Riser - Dell E43S Series Installation And Service Manual

Figure 28. Removing the M.2 SATA x16 riser
Next step
Install the M.2 SATA x16 riser.

Installing the M.2 SATA x16 riser

Prerequisite
1 Follow the safety guidelines listed in
Steps
1 Connect the data cable to the riser.
2 Insert the keyed end of the M.2 SATA riser into the lock on the system board.
3 Align and insert the edge connector into the connector on the system board.
4 Using the Phillips #2 screwdriver, tighten the screw to secure the riser to the sled.
Safety instructions.
Installing and removing system components 71