Inside The Sled; Xc6420 Series Sled; Removing A Sled - Dell E43S Series Installation And Service Manual

• #4 nut driver
• Torx #T30 screwdriver
• Wrist grounding strap
• ESD mat

Inside the sled

CAUTION: This system must be operated with the system cover installed to ensure proper cooling.
Figure 8. Inside the XC6420 sled
1 sled pull handle
3 SATA connector
5 CPU1 processor heat sink module
7 supporting bracket
9 memory slot (4)

XC6420 Series sled

The XC6420 Series sled is a server unit that is installed into the XC6400 Series enclosure. The sled features dual processors, memory, a
PCIe expansion slot, mezzanine cards, and onboard storage (SD card and M.2 SATA).

Removing a sled

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
NOTE: The process of removing a sled blank is similar to removing a sled.
Step
Press the retaining latch and using the handle slide the sled out of the enclosure horizontally, ensuring that the sled is supported from
beneath.
50 Installing and removing system components
Safety instructions.
Before working inside your
2 mezzanine card
4 memory slot (4)
6 CPU2 processor heat sink module socket
8 M.2 SATA riser
10 PCIe expansion card riser assembly
system.