6. Installation
6.1 General
After reading the previous sections in this booklet and
all other associated manuals provided for the system,
please install the Heatrae Sadia HI-MAX INSTANT
paying attention to the following hydraulic, electrical
and commissioning sections.
All hot and cold water pipes should be
labelled and insulated in accordance with Part L of
the Building Regulations.
6.2 Water connections
Connection to the unit
The Heatrae Sadia HI-MAX INSTANT is supplied with
the following connections:
1) District heating fl ow connection 3/4"bsp female
2) District heating return connection 3/4"bsp female
3) Apartment heating fl ow connection 3/4"bsp female
4) Apartment heating return connection 3/4"bsp
female
5) DHW cold feed connection 3/4"bsp female
6) DHW fl ow connection 3/4"bsp female
7) Safety valve discharge pipe 15mm
These can be reorientated with the use of a stand-off
kit.
Figure 23: Hydraulic connection position options
1
Standard unit
6
26
2
3 7 5
4
6
3
1
2
5
4
Stand-off kit - A
7
Stand-off kit - B
1 2
6 3 7 5 4
6
1
2
5
Stand-off kit - C
3 7
4
1
3
2
4
Stand-off kit - D
6
7 5