Ricoh Pro C9200 Operating Instructions Manual page 33

• Creases, Worm Track (Wavy Streaks), or Bends Appear
• If (J086) Appears
• Reducing the Waiting Time Prior to Printing
• Improving Throughput when Continuously Printing on Paper of Different Types or Thicknesses
• Excessive or Uneven Glossiness
For detailed procedure, see the Troubleshooting manual.
Fusing pressure roller contact before job
1242 [Fusing Pressure Roller On Before Fusing]
Function
The pressure roller comes into contact with the fusing belt before the job starts, so that the pressure
roller is well heated in advance. With the pressure roller heated, toner particles that adhere to the
pressure roller during the job will melt and become more easily removable by the cleaning web.
Effective for:
Small black spots, images affected by toner adhesion to the pressure roller separation plate
Related Troubleshooting
• Black (color) Spots (2)
For detailed procedure, see the Troubleshooting manual.
Fusing pressure roller contact after job
1243 [Fusing Pressure Roller On After Fusing]
Function
The pressure roller comes into contact with the fusing belt after the job completes, to heat the
pressure roller. With the pressure roller heated, toner particles that adhered to the pressure roller
during the job will melt and become more easily removable by the cleaning web.
When to use
This setting basically does not require any adjustments.
Related Troubleshooting
None
Fusing cleaning web
1244 [Fusing Cleaning Web]
Image Quality
31