Advertisement
Table of Contents
40/40 Duct Mount
P/N 777670
Installation Instructions
Document ref: TM-F-4040Duct, Rev (-) January 2012
Spectrex Headquarters: 218 Little Falls Road | Cedar Grove | NJ 07009 | USA
Tel: +1 (973) 239-8398 | +1 (800) 452-2107 (US only) | Fax: +1 (973) 239-7614
Houston: +1 (832) 321-5229 | Europe: +44 (141) 578-0693
E-mail:
spectrex@spectrex.net
| Website:
www.spectrex.net
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Spectrex SharpEye 777670
Summary of Contents for Spectrex SharpEye 777670
- Page 1 Installation Instructions Document ref: TM-F-4040Duct, Rev (-) January 2012 Spectrex Headquarters: 218 Little Falls Road | Cedar Grove | NJ 07009 | USA Tel: +1 (973) 239-8398 | +1 (800) 452-2107 (US only) | Fax: +1 (973) 239-7614 Houston: +1 (832) 321-5229 | Europe: +44 (141) 578-0693 E-mail: spectrex@spectrex.net...
- Page 2 ...
-
Page 3: Legal Notice
Spectrex, Inc. While great efforts have been made to assure the accuracy and clarity of this document, Spectrex, Inc. -
Page 4: Release History
Release History Prepared by Approved Date Revision History January 2012 First Release Ian Buchanan Eric Zinn iv ... - Page 5 SharpEye 40/40 Duct mount Installation Instructions DUCT MOUNT INSTALLATION INSTRUCTIONS 1. Surface Preparation (Figure 1) a. Check the air duct installation surface (2) stability. It should be as near as possible to a riding girder connection in order to assure proper support to the mounting and to the unit.
- Page 6 TM-F-4040Duct, Rev (-) January 2012 2. Disassembly of the Duct Mount Open nuts (5) and (8), and washers (4) and (7). Dismount item (1) internal plate and item (3) base plate (see figure 2 and 3). Figure 2 – Duct Mount Disassembly Description of Figure 3 2 Internal Plates Base Plate...
- Page 7 SharpEye 40/40 Duct mount Installation Instructions 3. Mounting the Duct Mount (figure 4) a. Insert the first internal plate (1) through the air duct (2) hole (2.1). Hold it by hand and press the base plate (3) to the installation surface against the internal plate (at base plate (3) there is a gasket which is glued).
- Page 8 TM-F-4040Duct, Rev (-) January 2012 Figure 5 – Duct Mount Parts after Assembly ...
- Page 9 SharpEye 40/40 Duct mount Installation Instructions 4. Mounting the Detector (figure 6) Insert the detector (9) at pin (10) and secure it using a screw (11). NOTE: Screw (11) is already mounted on the detector and should be removed and reinstalled facing the other direction. Figure 6 –...
-
Page 10: Technical Support
Tel: +1 (973) 239 8398 Fax: +1 (973) 239 7614 Email: spectrex@spectrex.net Web-site: www.spectrex.net Your Local Office: SPECTREX INC. Texas (USA) Mr. Jay Cooley, Regional Sales Manager 16203 Park Row, Suite 150 Houston, Texas 77084 Phone: +1 (832) 321 5229 Email: jay@spectrex.net...
Need help?
Do you have a question about the SharpEye 777670 and is the answer not in the manual?
Questions and answers