Barco ClickShare CSE-800 Installation Manuals page 29

1
Image 2-2
1 2x USB port 3.0
2 Standby button
USB ports
The USB ports (front or back) are used to update the soft- and firmware of both the Base Unit and the Buttons.
To pair the buttons, connect the touchscreen and saving blackboarding/annotation screen to USB stick
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks
whether the Button's software and firmware are up to date. If not, the Base Unit updates the software and/or
firmware.
To update the Base Unit software, download the latest version of the software from the Barco website. Copy
the file on a USB stick and plug it into the USB port of the Base Unit. Follow the progress and instructions on
the display.
Status LED
The color of the LED at the front of the Base Unit give information on the status of the system.
LEDs behavior
static red
blinking white
breathing white
static white
2: touchscreen connection, blackboarding/annotation screen saving will be available in future releases
2
Explanation
• receiving content from the Buttons and streaming towards the
display.
• pairing and software update of the Button is done. You can now
unplug the Button from the Base Unit.
• during the first phase of the Base Unit boot process.
• system is starting up (during the second phase)
• Button pairing is in progress
• software update of the Base Unit
• ECO standby mode
• awake and ready (i.e. showing the welcome message on the
display)
• pairing is done
CSE-800 Specifications
R5900049 /07 ClickShare CSE-800
2 .
29