Procontrol+ Smart Device Application; Basic Controls; Connecting To The Panel - Pyronix Enforcer V10 User Manual

Press h and the LCD will change to
4.
'Password?' Press f and enter the password
for the wireless network. Press f to return
to 'Password?' .
Press h and the panel will display the Wi-Fi
5.
signal strength.
Please note: This needs to be 11 or above
Press f and the panel will return to 'WI-FI
6.
SETUP?' . Press a to exit and save.

ProControl+ Smart Device Application

Basic Controls

Connecting to the Panel

1. Select the intruder system from the homescreen of
that you wish to set.
2. Enter your 'User Code and 'App Password' and tap 'Login' .
Please note: Whilst you are connected to the panel via ProControl+, you will not receive notifications. To
disconnect, press
16
in the top right corner of the system controls screen.
Enforcer V!0 User Guide
Password?
Signal Strength
16
WI-FI SETUP?
ProControl+