Upgrading Firmware - Persistent Systems Wave Relay MPU5 Operator's Manual

USING THE WEB MANAGEMENT INTERFACE: UPGRADING FIRMWARE

Upgrading Firmware

1
Click the Node Configuration tab.
3
Click Choose File, then navigate to and select the firmware file you wish to load.
4
Click Upload.
WARNING!: A firmware upgrade will cause the node to be reconfigured, an operation that
!
causes a period of downtime. Do not perform a firmware upgrade during mission critical
operations that cannot tolerate such disruptions. Perform firmware upgrades only during
scheduled maintenance or other appropriate times.
WARNING!: when upgrading or downgrading a node's firmware, the LED will turn purple.
!
Do not unnecessarily disturb devices during an upgrade. Loss of power during the upgrade
can permanently damage the device.
Note: when new firmware is available for the MPU5, you will receive an email with the new firm-
ware file to upgrade your units.
Note: MPU5 firmware will NOT load on legacy Wave Relay
80
2
Click the Firmware Upgrade button.
devices (MPU4, MPU3, QUAD).
®
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved