Perform A Throughput Test - Persistent Systems Wave Relay MPU5 Operator's Manual

TESTING CONNECTIVITY: THROUGHPUT TEST

Perform a Throughput Test

1
Click the Node Status tab.
2
Click the Bandwidth Test button.
Select a destination node for the through-
3
put test from the Destination drop-down
menu. This menu is populated from the
Node List.
Enter the desired test duration (in sec-
4
onds) in the Test Duration field.
Note: Persistent Systems recommends the test
duration to be set to a minimum of 5 seconds.
72
Check or uncheck the Upload only test
5
box. If this box is checked, only upload
speed to the destination node will be test-
ed.
WARNING!: During long duration tests,
!
data will continue to be sent for the full
specified duration even if a different data
flow is started or the web browser is exit-
ed.
Click Run Test and wait for the test to com-
6
plete.
The page will display the upload speed to
7
and download speed from the destination
node.
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved