Table of Contents
Advertisement
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
Advanced Video Configuration Options
Click Show/Hide Advanced Settings. This
1
will show or hide drop-down menus for
I-Frame Interval, IDR-Frame Interval, and
Protocol.
I-Frame Interval (Advanced): Sets the time between I-Frames (in seconds). The shorter amount
of time between I-Frames, the better video quality will be, but the video stream will use more
bandwidth. It is not recommended for non-advanced users to change this setting.
IDR-Frame Interval (Advanced): Sets the time between IDR-Frames (in seconds). Increasing IDR-
Frame interval will decrease the bandwidth used by the stream, but it may reduce video quality. It is
not recommended for non-advanced users to change this setting.
Note: Available IDR-Frame Interval options change based on the selected I-Frame interval. If you
change I-Frame Interval and the selected IDR-Frame Interval setting is available for that I-Frame
Interval, the IDR-Frame Interval will not change. If you change I-Frame Interval and the selected IDR-
Frame Interval setting is not available for that I-Frame Interval, IDR-Frame Interval will be set to the
factory default setting for that I-Frame Interval.
Protocol (Advanced): Selects the streaming protocol for the video stream. Options are: MPEG-TS/
UDP or RTP/UDP.
102
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Wave Relay MPU5 and is the answer not in the manual?
Questions and answers
I'm having an issue with the MPU5 radio where it stuck in boot mode. Is there a fix for this?