Enable Push-To-Talk; Set Earpiece Volume - Persistent Systems Wave Relay MPU5 Operator's Manual

Enable Push-to-Talk

In the Run PTT Subsystem drop-down
1
menu, select Enabled.
2
To disable Push-to-Talk, select Disabled.

Set Earpiece Volume

Next to Volume, check the Network De-
1
fault box to use the Network Default ear-
piece volume.
To customize earpiece volume, uncheck
2
the Network Default box.
In the Volume field, enter a value 0 - 125.
3
Values above 100 are digitally amplified.
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
DEVICE OPERATION: CONFIGURING PTT SETTINGS
131