Installing The Smartice Paper Roll; Installing An External Pin Pad - Hypercom SmartICE Hardware And Installation Manual

Chapter 2

Installing the SmartICE Paper Roll

The SmartICE uses a paper roll for receipt printing.
Step-by-Step
To install the SmartICE paper roll:
1. Open the paper bucket cover and remove the paper roll.
2. Place the paper roll in the bucket so the paper feeds from under the roll, not over the top,
and has a straight-line path into the printer paper-feed mechanism.
3. Feed the paper evenly into the paper feed slot at the rear of the SmartICE terminal.
4. When the paper appears, close the paper bucket cover. The printer is now ready to print
receipts.

Installing an External PIN Pad

The SmartICE supports an external PIN pad.
Step-by-Step
To install an external PIN pad on the SmartICE terminal:
1. Insert the PIN pad connector into the opening marked PIN on the under panel of the
SmartICE terminal. The use of a different cable might result in improper operation.
2. Ensure that the PIN pad cable latches are firmly locked into the jack on the SmartICE
terminal.
2-4 SmartICE Hardware and Installation Manual 940264-001