6.2.2 Recharge Requirements When Over Discharged ................8 7 Compatible Inverter List ........................9 8 Common Issues and Solutions ......................9 8.1 Common Issues of BYD Battery-Box HV and Solutions ................. 9 8.2 Common Issues Displayed On Inverter and Solutions ................9 8.3 Emergency................................9 9 Warranty ............................
BYD Battery-Box HV User Manual 1 General Information 1.1 Validity This user manual is applicable to the BYD Battery-Box H 6.4 / 7.7 / 9.0 / 10.2 / 11.5. 1.2 Application This user manual contains BYD Battery-Box HV product information, usage guidance, safety information, and details on common operating issues and subsequent corrective actions.
BYD Battery-Box HV User Manual BCU: Battery Control unit and Base. Two parts consisting of both the battery management and control component mounted on top of the battery modules as well as structural base, which physically supports the battery modules underneath.
SMA / Kostal and more brands to be announced Test conditions: 100% DOD, 0.2C charge & discharge @+25℃.System Usable Energy may be variant with different inverter brands -10℃~+12℃ will be derating Detailed information refer to BYD Battery-Box Compatible Inverter List...
BYD Battery-Box HV User Manual When BYD Battery-Box HV operates in low temperatures, the charge and discharge current is adjusted automatically. The battery will limit the current when the operating temperature gets low. Please refer to the table below for current parameters related to operating temperature: Charge Current at Various Temperatures Ranges Temperature Range (℃)
BYD Battery-Box HV User Manual Product overview Major Components: Base B-Plus H 1.28 5.2 BYD Battery-Box HV Configuration Table Configuration Energy Name Voltage(V) (kWh) B-Plus H 1.28 Base Battery-Box H 6.4 200~282 Battery-Box H 7.7 7.68 240~338 Battery-Box H 9.0 8.96...
BYD Battery-Box HV User Manual 5.3.1 BCU Interface Introduction (Left Side) Position Designation Left side terminals 5.3.2 BCU Interface Introduction (Right Side) Position Designation Right side terminals System Air Switch 5.3.3 BCU Functional Interfaces Definition Interface Name Description The system positive terminal, connected to the inverter positive...
6 Cleaning and Maintenance 6.1 Cleaning It is recommended that the BYD Battery-Box HV system be cleaned periodically. If the enclosure is dirty, please use a soft,dry brush or a dust collector to remove the dust. Liquids such as solvents, abrasives or corrosive liquids should not be used to clean the enclosure.
Battery high temperature protection provider immediately. Other hardware failures. If the BYD Battery-Box HV system has been connected to the router, user can monitor the running status of battery, warning, and alarm information via the built-in webpage, the log-in procedure is as following: Enter the correct IP address in the browser (IE, Google Chrome or Mozilla Firebox browsers are recommended), and then enter the account and password to log in (the login ID: user;...
BYD Battery-Box HV User Manual 9 Warranty BYD provides warranty when the product is installed and used according to the instructions contain in the User Manual, Installation Manual, and Warranty Letter. 1. Please contact our local service provider for technical support & after sales service.