Siemens SINAMICS S120 Operating Instructions Manual page 29

Basic commissioning: Entering the basic parameters
Cabinet Modules Operator Panel AOP30
Operating Instructions, 04/2014, A5E03263551A
3.4 Initial commissioning
Entering the basic commissioning parame-
ters
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
To change a parameter value, navigate to
the required selection field and activate
with <F5>.
Another window appears in which you can
- Enter the required value directly, or
- Select the value from a list.
Final confirmation
Confirm the basic parameters to save
them.
Once you have selected "Continue" and
activated your entries with <F5>, the basic
parameters you entered are permanently
saved and the calculations required for
closed-loop control are carried out.
Commissioning
29