Siemens SINAMICS S120 Operating Instructions Manual page 25

Basic commissioning: Select oper. type
Basic commissioning: Selecting the motor type and entering the motor data
Cabinet Modules Operator Panel AOP30
Operating Instructions, 04/2014, A5E03263551A
3.4 Initial commissioning
Selecting the operation type for a drive.
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
You can select the motor standard and type
in the dialog screen.
The following is defined for the motor stand-
ard:
0: Line frequency 50 Hz, motor data in kW
1: Line frequency 60 Hz, motor data in hp
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
Entering the motor data specified on the type
plate.
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
To change a parameter value, navigate to
the required selection field and activate with
<F5>.
The system displays another window in
which you can:
• Enter the required value directly, or
• Select the value from a list
When you have finished entering the motor
data, choose "Continue" below the final pa-
rameter value and activate with <F5>.
Commissioning
25