Commissioning
3.3 Loading the firmware
Figure 3-4
You should answer this prompt with "YES" in order to match the functionality of the AOP30
to that of the firmware version on the memory card.
The firmware will then be downloaded automatically to the operator panel. The message box
below is displayed to indicate the download process.
Figure 3-5
Note
If the firmware download is not successful, you can perform the process manually → see
section "Maintenance and Servicing" - "Download new firmware from PC".
20
Selection of firmware version (version on the memory card is older than the AOP
version)
Firmware being loaded
Cabinet Modules Operator Panel AOP30
Operating Instructions, 04/2014, A5E03263551A