Siemens SINAMICS S120 Operating Instructions Manual page 12

Safety information
1.1 General safety instructions
NOTICE
Device damage caused by incorrect voltage/insulation tests
Incorrect voltage/insulation tests can damage the device.
• Before carrying out a voltage/insulation test, disconnect the system/machine.
All converters and motors are subject to a high voltage test in the manufacturer's facility. As
a consequence, it is not necessary to carry out additional tasks in the system/machine.
Danger to life when safety functions are inactive
Safety functions that are inactive or that have not been adjusted accordingly can cause
operational faults on machines that could lead to serious injury or death.
• Observe the information in the appropriate product documentation before
• Carry out a safety inspection for functions relevant to safety on the entire system,
• Ensure that the safety functions used in your drives and automation tasks are adjusted
• Perform a function test.
• Only put your plant into live operation once you have absolutely guaranteed that the
Note
Important safety notices for safety functions
If you want to use safety functions, you must observe the safety notices in the safety
manuals.
12
WARNING
commissioning.
including all safety-related components.
and activated through appropriate parameterizing.
functions relevant to safety are operating correctly.
Cabinet Modules Operator Panel AOP30
Operating Instructions, 04/2014, A5E03263551A