Features
Air connection with filter
Plug nipple 1/4"
ON/OFF switch
Safety lock-out
Protective cover
Spindle
Auxiliary handle
Rear clamping flange
Grinding disc
Front flange
Open-ended spanner
Two-hole spanner
Oil container
Teflon tape
Hex key
Package contents
1 Air angle grinder PDWS 125 A1
1 auxiliary handle
1 grinding disc Ø 5" (Ø 125 mm)
1 two-hole spanner
1 open-ended spanner
1 hex key
1 m PTFE tape
1 plug nipple (1/4")
1 oil container
1 operating manual
Technical data
Rated speed:
Rated air pressure:
Disc size:
Threaded mounting:
Plug nipple:
Weight (with auxiliary handle):
approx. 3.8 lb (1.72 kg)
PDWS 125 A1
10000 min
-1
(rpm)
max. 6.3 bar / 90 PSI
Ø 5" (Ø 125 mm)
M14
1/4"
Noise emission values:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Vibration emission value:
a
= 2.44 m/s
2
h
Uncertainty K = 1.5 m/s
General
WARNING!
safety rules
WARNING!
►
For multiple hazards: Please ensure that you
have read and understood the safety instruc-
tions before adjusting, operating, repairing,
maintaining or replacing accessories on the
angle grinder as well as before working in
the vicinity of the machine. Failure to do this
can result in serious bodily injury.
■
The grinding machine for abrasive media should
only be adjusted, set or used by adequately
qualified and trained operators.
■
This machine may not be modified. Modifications
can reduce the effectiveness of the safety meas-
ures and increase the risks for the operator.
■
Do not lose the safety instructions – hand them
to the operator.
■
Never use damaged grinding machines for
abrasive media.
L
= 90.2 dB (A)
pA
K
= 3 dB
pA
L
= 101.2 dB (A)
WA
K
= 3 dB
WA
2
│
US - EN
3
■