Kitchen Timer; Time Cooking - Kenmore 565.693 Owner's Manual

KITCHEN TIMER
You can use the Kitchen Timer function independently, even while a cooking
program is going on in the oven,
Example: To set timer for 3 minutes:
Step Procedure
Touch KITCHEN TIMER,
1
Touch 3, 0 and 0 to set 3
2
minutes.
(up to 99 minutes 99 seconds
Touch START.
3
The timer starts counting and
beeps sound for 7 seconds at
the end.
Note: •
Keypad
KITCHEN
TIMER
3 0 0
START _,
Display
_K
U
_l n_ K
Lt U
i_aFt K
LI LI
To check remaining timer time during cooking, touch KITCHEN TIMER.
The remaining time appears in the display for 5 seconds.
• To clear a timer setting, touch STOP/CLEAR while the display shows
remaining timer time.
• The indicator K flashes when the display shows a cooking time.
• The indicator K lights when the display shows a timer time.
• To stop beeps of Kitchen Timer, touch KITCHEN TIMER.
• Kitchen Timer will not beep if the oven beeps at the same time to indicate
another oven operation (the end of a cooking, for example).
• If you do not enter a timer time for 10 seconds after step 1, the setting is
cleared with a beep.
• If a cooking completes while you are setting the Kitchen Timer, all settings are
cleared. Restart from step 1.
• If no key is touched for 5 seconds after the last key entry at step 2 above, the
timer automatically starts.
TIME COOKING
This basic microwave cooking method allows you to cook food for a desired time.
In addition to the P100 (maximum) power level, you can select different microwave
power from 11 levels, P 0 to P100 (0-100% of total power level).
Manual Defrosting (Without using Auto Defrost feature):
Us_o_er level P 30. To speed up the defrosting of dense foods over 1 ib (450 g),
you may start on P100 for 2 minutes, then reduce to the level P 30.
Delay Start Cooking:
Use power level P 0 for the first stage of multistage cooking. You can delay cooking
start time by up to 99 minutes 99 seconds.
Multistage Cooking
You can program up to 3 stages of cooking in sequence. Each stage can be
programmed with a different power and time setting. To program 2-stage or 3-stage
cooking, repeat the Time Cooking steps 1 to 3 and touch START. The oven
automatically proceeds to the end of cooking.
• When you cook on P100 power for 1-stage, you must enter POWER, 1 and 0.
"t_u can not skip step 2, 3 when setting multistage cooking.
12