INSTALLATION
Remove
all packing material
and accessories.
Examine
the oven for any damage
such as dents or broken door.
Do not install if oven is damaged.
1.
Select a level surface that provides
enough open space for the intake and/or
outlet vents.
A minimum
clearance
of 3 inches (7.5 cm) is required between the oven and any
adjacent
wall. One side must be open.
•
Leave a minimum
clearance
of 3 inches (7.5 cm) above the oven.
•
Do not remove the legs from the bottom of the oven.
•
Blocking
the intake and/or outlet openings
can damage
the oven.
•
Do not install oven over a range, cooktop or other heat-producing
appliance.
2.
Plug your oven into a standard
120-volt / 60-Hz household
outlet.
Be sure the electrical
circuit is at least 15 amperes and that your microwave
oven
is the only appliance
on the circuit.
27 inch Built-in
Kit
Your oven can be built into a cabinet by
using an optional built-in kit. Contact the
store where you purchased
your oven.
Model No.
Built-in Kit Stock No.
56.5,_9300
20-69920
565.69301
20-69921
565.69400
20-69910
565.69401
20-69911
• The oven requires an opening of 25"
(w) x 17" (h) x 21" (d) for installation.
NOTE: This unit is not designed
for 50
Hz or any circuit other than a 120-volt/
60-Hz AC circuit. This oven is designed
for countertop
or built-in installation.
•
When using the built-in kit, a
minimum
clearance
of 2 feet is
required
between
the oven and heat-
producing
appliance.
For example,
next to or above a conventional
gas
or electric
range or above
conventional
wall oven. Leave a
minimum
clearance
of 2 feet around
the even. If installed near or over a
hee-t, source,
the oven could be
damaged
and the warranty
would be
void.
9