Table of Contents
Advertisement
Please read these hints carefully to get the best performance
from your
cordless telephone.
Rechargeable
battery
Q Charge the rechargeable
battery for a full 12 hours before using the
cordless telephone
for the first time. (See page 8.)
Clean the battery charging terminals on the handset and the base station
once a month by wiping them with a soft cloth moistened
lightly with
isopropyl alcohol.
Security code
This cordless telephone
has a digital security system with 10 million possible
codes. This system helps to prevent unauthorized
use of your telephone
line
by another cordless telephone.
If you hear a high-pitched
beep tone, or no dial tone, this means that the
security code has been lost. If this occurs, reset the security code as de-
scribed on page 11.
If a power failure occurs, or if the battery is replaced, the security code
must be reset. (See page 11.)
Operating
range
The operating
range may vary depending
on the operating conditions,
location and distance between the base station and the handset. For the
best possible performance,
locate the base station in the highest room
feasible in your home or office, and as close to the centre of the desired
operating area as possible.
For the best performance
under normal operating conditions,
extend the
base station antenna fully.
Since cordless telephones
use radio frequencies
for communication,
certain
obstacles between the base station and the handset may reduce the operat-
ing range.
The following are some examples.
- Concrete walls
- Tile walls (typically used in bathrooms)
- Large metal objects (such as refrigerators,
metal cabinets, etc.)
- Metal shielding inside of walls
- Metal fences
- Objects which obstruct radio frequencies
NOTE:
If you are beyond the operating
range of the telephone,
the END
button or SCAN button does not operate properfy. If this occurs, move closer
to the base station and try again.
-4-
Advertisement
Table of Contents
