Table of Contents
Advertisement
btl
To change your outgoing
Room monitoring
message by remote
The CLA-I 380 lets you monitor the
1.
2.
3.
4.
5.
6.
Dial~ou~ phone number and
ambient sound of the room where
listen to your outgoing mes-
the answering system is located.
sage.
1.
After you hear the beep at the
end of the outgoing message,
enter your remote access code.
2.
The message tape rewinds and
plays back your messages.
After the last message, 3 beeps
3.
sound.
After 3 beeps, press "7" imme-
diately.
Record
your new outgoing
4.
message.
Press "8" to finish recording.
Wait a moment. Your new
outgoing message will play
back automatically.
Hang up after you hear the new
outgoing message.
If you change your outgoing
message, the message tape
rewinds to the beginning and
any new messages are record-
ed over the old ones.
To turn off the answering
system by remote
1.
2.
3.
4.
Dial your phone number and
listen to your outgoing mes-
sage.
After you hear the beep at the
end of the outgoing message,
enter your remote acoess code.
Press "O".
Hang up.
The answering system turns off
automatically.
Dial your phone number and
listen to your outgoing mes-
sage.
After you hear the beep at the
end of the outgoing message,
enter your remote access code.
Press "5" to begin monitoring.
After 30 seconds you hear a
beep and the answering
system
hangs up automatically.
To listen for another 30 sec-
onds, press "5" again immedi-
ately after the beep.
L———-
.——
—
J
Advertisement
Table of Contents
