Table of Contents
Advertisement
RING DELAY Switch
(2/4/AUTO)
Set to 2 to have calls answered on the
second ring.
Modular Telephone
Jack (TEL LINE)
Set to 4 to have calls answered on the
(See page 9.)
fourth ring.
Set to AUTO to set to Toil Saver mode.
(See page 13.)
BACK OF UNIT
RINGER Switch (OFF/LO/Hi)
Adjusts the volume of the base
station ringer. When set to
OFF, no ring is heard. (If a call
is received during an intercom
conversation, the ring is heard
even if the RINGER switch is
set to OFF.)
AC Adaptor
'
Jack (DC 9V)
(See page 7.)
CPCIANS.ONLY
Switch
For normal use, set to CPC ON. If you have
EASY CALL service or a noisy telephone
exchange, set to CPC OFF.
\
If you do not want to receive messages, set
to ANS.ONLY (answer only). (See page 13.)
SIDE VIEW
VOLUME Control
Adjusts the sound level from the base
station speaker. (See page 10.)
BOTTOM VIEW
Remote Access Code Number Label
(See page 33.)
Advertisement
Table of Contents
