Table of Contents
Advertisement
BEFORE YOU LEAVE
1.
2.
Make sure there is enough
space left on the message tape
to record your calls. If there is
not, rewind the tape or turn it
over and reinsert it.
Press the ANS SET button.
The ANSWER
indicator lights,
and your outgoing message
plays back automatically.
The
answering
system is now ready
to receive calls.
NOTES:
-
If you turn over or change the
message tape, you should
record your message again.
(This will record a backup
message as described on page
14.)
-
If 6 long beeps sound when you
press the ANS SET button, no
outgoing message has been
recorded.
TAPE END ALERT
If 3 long beeps sound and the
ANSWER
indicator flashes slowly
when you press the ANS SET
button, there is not enough space
left on the message tape to record
calls (or the tape has not been
inserted).
-27-
Advertisement
Table of Contents
