Button Function Explanation; Setup - La Crosse M84282 User Manual

Button Function Explanation

For better programming instructions, please note these terms for
button use:
• Press: Press and release the designated button.
• Hold: Hold the button for 3 seconds then release the button.

Setup

1. Install 2-AAA batteries into the VG-STG-T sensor.
2. Insert the 5.0 volt power cable into a wall outlet, then into the
side of the station.
Optional: Insert 3-AAA batteries into the back of the station.
4. Keep sensor and weather station within 5 feet for at least 15
minutes after installing batteries. This allows the sensor and station
to sync properly and ensures a strong connection.
5. After 15 minutes, place sensor in desired location (position
sensor page
6. Program the station in the settings menu.
Note: Press the TX button inside the battery cover of the sensor to
force a signal transmission.
M84282
8).
AAA
AAA
AAA
www.lacrossetechnology.com/support
Power
Cable
Page | 2