Quick Mounting Tips; Button Functions - La Crosse S82950 Instruction Manual

Q UI CK M OUNT ING T I PS
WIND SPEED
Ensure the sensor is mounted vertically – an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
WAT ER LEAK
Works best placed flat on the floor. The water sensor contacts should not be touching other metal.
It will detect water at 0.031 inches (0.787 mm). When placed vertically the water needs to be at least 0.25
inches (6.35 mm) to trigger the alert.
T HERMO-HYGR O
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
For detailed sensor setup and mounting instructions, see
B UT TO N FUNC T IO NS
Buttons located on top of Profesional Weather Station
ALERTS WIND
Buttons located on the right side of Professional Weather Station
ALERTS
WIND, TEMP
+ or –
+ & –
SET
EXTRA SENSOR
SENSOR
LIGHT
ALERTS & LIGHT
DAILY, HOURLY
Wi-Fi Wind & Weather Station
TEMP
Hold to enter Alert Set Mode.
Press to view history.
Use + or – to adjust values in settings.
Hold both buttons to search for Wi-Fi.
Hold for basic settings. Press to view Wi-Fi status.
Press to toggle through Extra Sensors & Barometric Pressure.
Hold to add Sensors.
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
Press to adjust brightness. Hold to set Auto Dim.
Hold both buttons to reset all sensor ID's and Wi-Fi settings.
Press to see forecast. Must be connected to Wi-Fi.
page 26.
EXTRA
SET SENSOR
SENSOR
LIGHT
Page | 4