Jungheinrich DFG 316s Operating Instructions Manual page 80

4.8.1 Service brake
In normal travel mode you brake by throttling back
using the accelerator pedal (70,71,72). The truck
will brake hydrostatically depending on the travel
program. This allows for sensitive metering of the
brake force.
Z
The parking brake automatically applies as
soon as the truck comes to a halt.
Auxiliary brake:
Apply the brake pedal (73).
CAUTION!
When you apply the auxiliary brake (73)
the full brake force is available.
The auxiliary brake must only be used
for emergency braking.
When the brake pedal is applied the
truck will brake irrespective of the
position of the accelerator pedal.
There is a higher risk of accidents and
injury.
The operator must first familiarise
himself with the auxiliary brake without
load and at low speed.
73
70 73 72
71
81