Step 6
Step 11
Calibration/zero offset
Before the calibration, please make sure the procedure of pairing with Giant Power Pro/Giant Power and
computer is finished. Please refer to technical manuals of the cycling computer to calibrate the Giant Power
Pro with cycling computer. The procedures may differ between various computers.
CAUTION: Please operate the calibration when assembling/disassembling the bottom bracket or cranks.
CAUTION: Please operate the calibration before every ride.
The following procedure is an example with a Giant NeosTrack cycling computer.
Tip: Calibration will only display when the power meter is activated and paired.
Tip: For the calibration procedures with smartphone app please refer to appendix C.
Step 16:After pairing successfully. Press to enter the "More" page.
Step 17:Press to choose Calibrate. Press to enter it
Step 7
Step 12
Step 13
Step 8
Step 14
7
Step 9
Step 10
Step 15