Giant Power Pro-R User Manual page 6

crank manufacturer for the correct torque values. If you encounter difficulties, please contact your local
authorized Giant retailer.
Step 3: check if all bolts are tightened to the correct torque value, as shown figure 3.
3-1 The standard torque value of M5 bolts left crank arm is usually 12-14 Nm. But please refer to the
specific technical manuals from the crank manufacturer to verify the correct torque value.
3-2 The M3 bolts are on the crank set for tightening the Giant Power Pro. The correct torque value is 3
Nm.
Step 4: Wake up the Giant Power Pro, as shown figure 4.
4-1 Rotate the crank arms clockwise or counterclockwise one time to wake up the Giant Power Pro. The
indicator light blinks green for 10 times.
4-2 If the indicator light blinks green once every 5 seconds after waking the Giant Power Pro, the battery
capacity is below 30% capacity. Please charge the battery.
Step 5: Pairing preparation.
5-1 Put the bike in horizontal position.
5-2 Keep the left crank arm in 6 o'clock position and the right crank in 12 o'clock position, as shown
figure 5-2 and 5-3.
Figure 3
Figure 5-2
5
Figure 4
Figure 5-3