Seagate 77767496 Product Manual page 165

Table 93: Error codes for bytes 12 and 13 of sense data (values are in hexadecimal) (Continued)
Byte 12 Byte 13
Description
(ASC) (ASCQ)
19 00 Defect list error
1A 00 Parameter list length error
1C 00 Defect list not found
1D 00 Miscompare during verify operation
20 00 Invalid command operation code
21 00 Logical block address out of range
24 00 Invalid field in CDB
25 00 Logical unit number not supported
26 00 Invalid field in parameter list
26 01 Invalid field parameter – parameter not supported
26 02 Invalid field parameter – parameter value invalid
26 03 Invalid field parameter – threshold parameter not supported
26 04 Invalid release of persistent reservation
26 97 Invalid field parameter – TMS firmware tag
26 98 Invalid field parameter – check sum
26 99 Invalid field parameter – firmware tag
27 00 Write protected
29 00 Power-on or reset
29 01 Power on
29 02 LIP reset
29 03 Device reset
29 04 Internal reset
2A 00 Parameters changed
2A 01 Mode parameters changed
2A 02 Log parameters changed
2A 03 Reservations preempted
2A 04 Reservation released
2A 05 Registrations preempted
2C 00 Command sequence error
2F 00 Tagged commands cleared by another initiator
31 00 Medium format corrupted
31 01 Format failed
31 91 Format corrupted – ETF WWN is invalid
32 00 No defect spare location available
32 01 Defect list update error
32 02 No spares available – too many defects on one track
Fibre Channel Interface Manual, Rev. D 151