Table of Contents
Advertisement
Table 50:
ADISC Accept Payload
Bit
7
Byte
0
0
1
0
2
0
3
0
Reserved
4
5
(MSB)
6
7
8
(MSB)
:
15
16
(MSB)
:
23
Reserved
24
25
(MSB)
26
27
Field definitions (listed alphabetically)
Table
number
Hard Address of Responder
50
This is the 24 bit NL_Port Identifier. The lower 8 bits are the AL_PA the drive attempts to acquire in the LIHA sequence dur-
ing loop initialization. This field represents the address indicated on the drive interface connector. If the drive does not have
a hard address, this 24 bit field is zeros. If the drive has a hard address and is able to acquire it during the loop initialization
process, the Hard Address and N_Port ID fields of the ADISC Accept will be the same.
LS Command Code (Link Services Command Code)
50
02h
ADISC Accept Payload.
Node Name of Responder
50
This is the unique 8 byte identifier for the drive sending the ADISC Accept. Refer to Table 23 for the format of the Node
Name.
N_Port ID of Responder
50
This is the 24 bit NL_Port Identifier used in the S_ID of the ADISC Accept header. The lower 8 bits are the AL_PA the drive
acquired during loop initialization.
Port Name of Responder
50
This is the unique 8 byte identifier for the drive port sending the ADISC Accept. Refer to Table 23 for the format of the Port
Name.
Fibre Channel Interface Manual, Rev. D
6
5
0
0
0
0
0
0
0
0
LS Command Code
Hard Address of Responder
Port Name of Responder
Node Name of Responder
N_Port ID of Responder
4
3
0
0
0
0
0
0
0
0
2
1
0
1
0
0
0
0
0
0
(LSB)
(LSB)
(LSB)
(LSB)
0
0
0
0
0
93
Advertisement
Table of Contents
