Siemens Simatic S7-1500 CPU 1512C-1 PN User Manual page 147

Article number
Switching capacity of the outputs
with resistive load, max.
•
on lamp load, max.
•
Load resistance range
lower limit
•
upper limit
•
Output voltage
Type of output voltage
•
for signal "0", max.
•
for signal "1", min.
•
Output current
for signal "1" rated value
•
for signal "1" permissible range, min.
•
for signal "1" permissible range, max.
•
for signal "0" residual current, max.
•
Output delay with resistive load
"0" to "1", max.
•
"1" to "0", max.
•
for technological functions
– "0" to "1", max.
– "1" to "0", max.
Parallel switching of two outputs
for logic links
•
for uprating
•
for redundant control of a load
•
Switching frequency
with resistive load, max.
•
with inductive load, max.
•
on lamp load, max.
•
CPU 1512C-1 PN (6ES7512-1CK01-0AB0)
Manual, 12/2017, A5E40898741-AA
6ES7512-1CK01-0AB0
0.5 A; 0.1 A with high-speed output, i.e. when
using a high-speed output; see manual for details
5 W; 1 W with high-speed output, i.e. when using
a high-speed output; see manual for details
48 Ω; 240 ohms with high-speed output, i.e. when
using a high-speed output; see manual for details
12 kΩ
DC
1 V; With high-speed output, i.e. when using a
high-speed output; see manual for details
23.2 V; L+ (-0.8 V)
0.5 A; 0.1 A with high-speed output, i.e. when
using a high-speed output, observe derating; see
manual for details
2 mA
0.6 A; 0.12 A with high-speed output, i.e. when
using a high-speed output, observe derating; see
manual for details
0.5 mA
200 µs
500 µs; Load-dependent
5 µs; Depending on the output used, see addi-
tional description in manual
5 µs; Depending on the output used, see addi-
tional description in manual
Yes; For technological functions: No
No
Yes; For technological functions: No
100 kHz; For high-speed output, 100 Hz for
standard output
0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe
derating curve
10 Hz
Technical specifications
147