A-020W-A Leds; Figure 5 A-020W-A Physical Connections; Table 7 A-020W-A Physical Connections - Nokia 7368 ISAM CPE Product Manual

A-020W-A unit data sheet
Figure 5
Table
Table 7

5.5 A-020W-A LEDs

Figure
28
Release 05.08.01 | June 2018 | Edition 01
A-020W-A physical connections
7 describes the physical connections for A-020W-A CPE devices.
A-020W-A physical connections
Connection Description
On/Off button This button powers the unit on or off.
LAN 1/LAN 2 This connection is provided through Ethernet RJ-45 connectors. Up to two
10/100/1000 Base-T Ethernet interfaces are supported.The Ethernet ports can
support both data and in-band video services on both interfaces.
WAN port This connection is provided through an RJ-45 Gigabit Ethernet interface. One
10/100/1000 Base-T Ethernet interface is supported.
WPS ON/Off button This button is used to start the WiFi Protected Setup (WPS) of new WiFi devices.
Reset button Pressing the Reset button for less than 10 seconds reboots the device; pressing
the Reset button for 10 seconds resets the device to the factory defaults.
Power input This connection is provided through the power connector. A power cable fitted with
a barrel connector is used to make the connection.
6 shows the A-020W-A CPE LEDs.
3FE-47511-AAAA-TCZZA
7368 ISAM CPE A-020W-A Product Guide
LAN 1
LAN 2
WAN
ON/OFF
28230
Issue: 01