Fcc Radiation Exposure Statement; Resistibility Requirements Compliance; Electrical Safety Guidelines - Nokia 7368 ISAM CPE Product Manual

7368 ISAM CPE A-020W-A Product Guide
2.2.4
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and consider removing the
no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that
2.2.5
The A-020W-A CPE equipment complies with the requirements of ITU
Recommendation K.21 for resistibility of telecommunication equipment installed in
customer premises to overvoltage and overcurrents.

2.3 Electrical safety guidelines

This section provides the electrical safety guidelines for the A-020W-A CPE
equipment.
Issue: 01
Release 05.08.01 | June 2018 | Edition 01

FCC Radiation Exposure Statement

may cause undesired operation.
Any changes or modifications not expressly
Caution —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.

Resistibility requirements compliance

The devices comply with the U.S. National Electrical
Note —
Code. However, local electrical authorities have jurisdiction
when there are differences between the local and U.S.
standards.
3FE-47511-AAAA-TCZZA
ANSI safety guidelines
13