Etsi Safety Guidelines; Safety Instructions; Safety Instruction Boxes - Nokia 7368 ISAM CPE Product Manual

7368 ISAM CPE A-020W-A Product Guide

3 ETSI safety guidelines

This chapter provides information about the mandatory regulations that govern the
installation and operation of A-020W-A CPE equipment.

3.1 Safety instructions

This section describes the safety instructions that are provided in the customer
documentation and on the equipment.
3.1.1
The safety instruction boxes are provided in the customer documentation. Observe
the instructions to meet safety requirements.
The following is an example of the Danger box.
The Danger box indicates that the described activity or situation may pose a threat
to personal safety. It calls attention to a situation or procedure which, if not correctly
performed or adhered to, may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully
understood and met.
The following is an example of the Warning box.
The Warning box indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid the
degradation of system operations or data.
Do not proceed beyond a warning until the indicated conditions are fully understood
and met.
Issue: 01
Release 05.08.01 | June 2018 | Edition 01

Safety instruction boxes

Possibility of personal injury.
Danger —
Possibility of equipment damage.
Warning 1 —
Possibility of data loss.
Warning 2 —
3FE-47511-AAAA-TCZZA

ETSI safety guidelines

15