Download  Print this page

Figure 28 Firewall Window - Nokia 7368 ISAM CPE Product Manual

Intelligent services access manager cpe.
Hide thumbs


Configure a A-020W-A
Procedure 23
Figure 28
Release 05.08.01 | June 2018 | Edition 01
parental control
access control
Firewall configuration
Select Security > Firewall from the top-level menu in the Ethernet Gateway window, as
shown in Figure 28.
Firewall window
Firewall security applies only to services provided by the A-020W-A CPE. Internet access
from the LAN side is not affected by this firewall.
Three security levels are available: Off, Low, and High.
At the Off level, no firewall security is in effect,
At the Low level, pre-routing is supported: port forwarding, DMZ, host application, and host
drop. Also supported are application services: DDNS, DHCP, DNS, H248, IGMP, NTP client,
SSH, Telnet, TFTP, TR-069, and VoIP. The following types of ICMP messages are permitted:
echo request and reply, destination unreachable, and TTL exceeded. Other types of ICMP
messages are blocked. DNS proxy is supported from LAN to WAN but not from WAN to LAN.
At the High level, pre-routing and application services are not supported. UDP Port 8000 can
be used to access the services, for example FTP can use 8021 and Telnet can use 8023.
Regular UDP cannot be used. RG access is permitted via the LAN side but not via the WAN
7368 ISAM CPE A-020W-A Product Guide
Issue: 01


   Related Manuals for Nokia 7368 ISAM CPE

   Related Content for Nokia 7368 ISAM CPE

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: