Application Configuration; Table 32 Access Control Parameters - Nokia 7368 ISAM CPE Product Manual

Configure a A-020W-A
Table 32
2
3
4
5
6
7
8.1.5
The A-020W-A CPE also supports application configuration, including:
•
•
•
•
•
82
Release 05.08.01 | June 2018 | Edition 01
Access control parameters
Field
WAN
Trusted Network Enable
ICMP, Telnet, SSH, HTTP, TR-069,
HTTPS
Source IP Start
Source IP End
Select a WAN connection from the drop-down menu.
Click to enable or disable Trusted Network.
Select an access control level for each of the six protocols: ICMP, Telnet, SSH, HTTP,
TR-069, and HTTPS for both the WAN and the LAN side.
Click Save.
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
STOP. This procedure is complete.

Application configuration

port forwarding
port triggering
DDNS
NTP
UPnP and DLNA
3FE-47511-AAAA-TCZZA
7368 ISAM CPE A-020W-A Product Guide
Description
Choose a connection from the drop-down menu
Click to enable or disable
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Issue: 01