Figure 19 Wan Window; Table 19 Wan Parameters - Nokia 7368 ISAM CPE Product Manual

Configure a A-020W-A
Procedure 15
1
Figure 19
Table 19
(1 of 2)
58
Release 05.08.01 | June 2018 | Edition 01
WAN networking configuration
Select Network > WAN from the top-level menu in the Ethernet Gateway window, as shown
in Figure 19.
WAN window
Table 19 describes the fields in the WAN window.
WAN parameters
Field
WAN Connection List
Connection Type
IP Mode
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
3FE-47511-AAAA-TCZZA
Description
Choose a WAN connection from the drop-down menu to set the connection
parameters
Select a connection type: IPoE or PPPoE
Choose an IP mode from the drop-down menu: IPv4 or IPv6
Select this checkbox to enable the WAN connection
Select this checkbox to enable NAT
Select the checkboxes to enable service types for this connection
Select this checkbox to enable VLAN
Enter the VLAN ID
7368 ISAM CPE A-020W-A Product Guide
Issue: 01