Figure C-3 Non-Garmin Integrated Flight Deck (Retrofit) Interconnect Example - Garmin GRA 5500 Installation Manual

APPENDIX C Interconnect Examples
THIS INTERCONNECT EXAMPLE DRAWING APPLIES ONLY TO NON-GARMIN INTEGRATED FLIGHT DECK (RETROFIT) INSTALLATIONS.
P55001
GRA 5500
RADAR ALTIMETER
ARINC 429 OUT 1 A 52
ARINC 429 OUT 1 B 55
RADAR ALTITUDE ALERT OUT* 1 32
RADAR ALTITUDE ALERT OUT* 2 17
USB VBUS POWER 44
USB DATA HI 49
USB DATA LO 54
USB GROUND 45
SIGNAL GROUND 43
CONFIG MODULE GROUND 48
CONFIG MODULE POWER 53
CONFIG MODULE DATA 40
CONFIG MODULE CLOCK 47
SELF TEST SELECT* 9
SELF TEST INHIBIT* 19
NOTES
1. EXTERNAL ACTIVE LOW DISCRETE OUTPUTS/ANNUNCIATORS FROM OTHER APPLIANCES MAY BE USED AS INPUTS FOR PINS 9 AND 19 INSTEAD OF SWITCHES.
2. CONFIGURATION MODULE USE IS OPTONAL. SEE SECTION 4.3.3 FOR MORE INFORMATION.
3. USB TYPE B RECEPTACLE PIGTAIL MUST BE WIRED DIRECTLY TO P55001. USB EXTENSION CABLES MUST BE DISCONNECTED FROM THE PIGTAIL WHILE IN FLIGHT.
190-01277-00
Revision A
S
}
OPTIONAL CONNECTIONS, SEE SECTION 4.4.2 FOR INFORMATION ON FUNCTIONALITY OF ALTITUDE ALERT OUTPUTS
RED
28 AWG
GRN
28 AWG
WHT
BLK
BLK
RED
YELLOW
WHT
}
OPTIONAL CONNECTIONS, SEE SECTIONS 3.7.4.1 AND 4.4.1 FOR INFORMATION ON FUNCTIONALITY OF MANUALLY
INTIATED ALTITUDE SELF-TEST AND SELF-TEST INHIBIT.
SEE NOTE 1
S
USB TYPE B
RECEPTACLE
1 VBUS
3 D+
SEE NOTE 3
2 D-
4 GND
SHIELD (DRAIN)
SHELL
1
4
3
2

Figure C-3 Non-Garmin Integrated Flight Deck (retrofit) Interconnect Example

DISPLAY UNIT AND/OR
OTHER ARINC 429 RECEIVERS
ARINC 429 IN A
ARINC 429 IN B
CONFIG MODULE
GND
VCC
SEE NOTE 2
DATA
CLOCK
GRA 5500 Installation Manual
Page C-3