Technical Specifications; Environmental Qualification Form; Physical Characteristics; General Specifications - Garmin GRA 5500 Installation Manual

1.4 Technical Specifications

1.4.1 Environmental Qualification Form

It is the responsibility of the installing agency to obtain the latest revision of the GRA 5500 Environmental
Qualification Form. This form is available directly from Garmin under the following part number:
GRA 5500 Environmental Qualification Form, Garmin part number 005-00616-01
To obtain a copy of this form, see the dealer/OEM portion of the Garmin web site (www.garmin.com).
1.4.2

Physical Characteristics

Table 1-1 lists the physical characteristics for the GRA 5500 unit, rack, and connectors. Refer to
Appendix B for additional information.
Characteristics
Unit Height (with mounting rack)
Unit Width (with or without mounting rack)
Unit Depth (with mounting rack and connector)
Unit Depth (with mounting rack, connector, and
configuration module)
Unit Weight (with mounting rack)
Typical Mating Circular Connector Weight
Typical Mating RF Connector Weight (2X)
1.4.3

General Specifications

For detailed specifications, see the Environmental Qualification Form (Section 1.4.1).
Characteristics
Operational Temperature Range
Altitude Range
Software Compliance
Hardware Compliance
Environmental Conditions
GRA 5500 Installation Manual
Page 1-2

Table 1-1 Physical Characteristics

0.07 lb (0.03 kg) (weight listed is for 2 connectors)

Table 1-2 General Specifications

Not Applicable - The GRA 5500 does not contain
any complex or programmable logic devices.
Specifications
3.99" (101.3 mm)
3.02" (76.7 mm)
11.62" (295.2 mm)
12.08" (306.9 mm)
3.5 lb (1.6 kg)
0.13 lb (0.06 kg)
Specifications
-55° C to +85° C
55,000 ft maximum
RTCA/DO-178B Level B
RTCA/DO-160F
190-01277-00
Rev. A