Yamaha PW-SE Original Instructions Manual page 29

Battery bottom
Battery lock
Battery handle
TIP
Top of the case
Battery pack mounting method (Down tube type)
• Insert the battery in the direction of the arrow so that
the battery bottom is aligned to the top of the case.
• Insert the upper part of the battery in the direction of
the arrow so that the battery handle is aligned to the
top of the battery lock.
• Press the upper part of the battery toward the frame
until it clicks into place to secure it.
TIP
How to install Multi location type battery packs varies be-
tween bicycles. For more information, see the instruction
manual supplied with the bicycle.
11. Make sure that it is securely attached by pulling the
battery pack after installation.
WARNING
• Do not short the contacts of the battery pack. Do-
ing so could cause the battery pack to become hot
or catch fire, resulting in serious injury or property
damage.
• Do not disassemble or modify the battery pack. Do-
ing so could cause the battery pack to become hot
or catch fire, resulting in serious injury or property
damage.
• Do not dispose of the battery pack in a fire or ex-
pose it to a heat source. Doing so could cause an
explosion, resulting in serious injury or property
damage.
• Do not drop the battery pack or subject it to impact.
Doing so could cause the battery pack to become
hot or catch fire, resulting in serious injury or prop-
erty damage.
NOTICE
Make sure there is no foreign matter on the battery
pack contacts before inserting the battery pack.
41
29