Advertisement
III. Mobile activation with automotive electricity
contract
If your vehicle still does not have Plug & Charge,
you can also activate the innogy eBox smart
(RFID) via mobile devices or a web browser.
The following devices are supported:
• iPhone: The iPhone eCharge app can be
downloaded in the App Store.
• Android: The Android eCharge app can be
downloaded in the Android Market.
• Internet-ready cell phone or mobile device: Call
up the following URL with your Internet-ready
cell phone:
innogy.com/emobility
Have the contract ID and password in the innogy
ePower electricity contract at hand for mobile
activation. The charging point number that you
also need is visible above the socket.
Charging is then completed as follows:
1. Connect the charging cable to the innogy
eBox smart (RFID) and the vehicle.
2. Send the contract information to the innogy
back end using your smartphone.
3. innogy eBox smart (RFID) legitimizes the ID.
4. The plug now locks when the ID is legitimized.
Charging activated, voltage applied and the
blue LED signals charging.
5. The blue LED switches off when charging is
completed. The green LED on the eBox smart
(RFID) fl ashes when charging is completed but
the cable is still connected. Note: Charging is
not terminated automatically.
6. Disconnect the charging cable from the vehi-
cle and charging box (unlock the vehicle in ad-
vance if necessary).
IV. Charging via RFID (charging card)
You can also authenticate yourself on the innogy
eBox smart RFID using RFID-enabled cards.
In addition to the innogy eBox smart RFID, a
pre-requisite for activation through RFID is an
appropriate service agreement to store the
identifi ers of your RFID cards in the innogy back
end with a contract or register your customer
cards in the innogy back end.
Charging activation
The RFID reader is activated when the LED lights
up green. If the LED does not light up, insert the
charging cable to activate the RFID reader. Please
hold your charging card in front of the card reader.
The card reader is located below the LED of the
charging point you have selected.
Recognition of the charging card is signaled by
green fl ashing of the LED. Please note that the
card reader only responds to specifi c card formats.
The system will not react if you have an incom-
patible charging card.
Following successful recognition of the charging
card, the authorization to charge is checked at
the charging point you selected.
If your charging card is not authorized to charge
at the charging point you have selected, this will
be signaled by a fl ashing red LED. Please contact
the contract provider (i.e., the offi ce that assigned
the contract number (CID)).
Operating instructions
9
Hide quick links:
Advertisement
